Ice Batching Scale's
SEMCO/SEMCOLD LLC offers two basic styles of scales to service the produce, fishing, and concrete industries. The BS series (Batch Scale) and the CBS series (Concrete Batch Scale). The BS series is offered in two sizes the BS-150 and the BS-300.
Once the predetermining counter on the scales reaches its preset count, it activates a series of timers to start shutting down all related equipment in series with the system, acting as a clean out mode for the system so that no ice is left in any part of the delivery system.
For weighing and metering fragmented ice.
CS-1000 Scale & Ice Maker
A working combination of an ice maker providing ice for storage into the ice bin below. With a transport auger dumping ice into a ice scale with another auger coming out of the scale into the desired exit point.
Concrete scales can be designed in a capacity range of up to 3000 lbs. Normal designs are available for 1000 lb, 2000 lb and 3000 lb scales.
Custom capacities such as 1500 lbs or 2700 lbs can also be designed and quoted.
Another version of the concrete scale. This version is elevated and with a blower to dispense ice to its desired location.
Ice batch scale with a pneumatic blower and a rotary valve to meter the ice that will enter the pneumatic pipe which will be delivered out from the system.
Ice & Concrete Scale's
The BS-150 scale
Weighs up to 150 pounds of ice in its weigh hopper. Once the scale indicator detects the desired weight that it is set for, the weigh hopper doors open and closes (Approx. 1 to 1-1/2 seconds) releasing the ice into the 600 pound delivery hopper with 12” discharge screw. The delivery rate is approximately 25 tons per hour.
This scale will weigh up to 300 pounds of ice in its weigh hopper. Once the scale indicator detects the desired weight that it is set for, the weigh hopper doors open and closes (Approx. 1-1/2 to 2 seconds) releasing the ice into the 1200 pound delivery hopper with 12” discharge. The delivery rate is approximately 45 tons per hour.
Concrete Batch Scale
The CBS-800 which will weigh up to 800 pounds and the CBS-2000 which will weigh up to 2000 pounds. All weigh hoppers are supplied with one right hand and one left hand discharge screws to empty the hopper when the desired weight has been reached.
Powered by either a 5 HP or 7-1/2 HP high torque gear drive motor
Weigh hoppers are supported by four independent beam load cells
Wired in and connected to the weigh indicator
Precision Ice Scales For All Industrial Needs
250# Capacity by 1/4# increments, large easy to read dial.
Semi-automatic or automatic controls.
Custom-fitted to blower or screw conveyors.
Large 12″ discharge screw with 1HP drive motor.