Self-Contained Moving Floor Bins

Modular designs for the industrial & commercial ice-making/store capacities you need. Self-contained ice banks are portable Bins. These fully assembled, insulated ice storage bins feature heavy structural frames that are shipped to the job site on a lowboy trailer and lifted onto concrete support piers or other structural framework by crane.

The bins have white Galvalume interior walls and exterior walls with 4” thick Urethane foamed insulation all around. Ice contact surfaces are offered in various materials. All structural steel is hot dipped galvanized. The side walls and roof may be reinforced to support ice-makers and other roof mounted equipment at additional cost.

MIP Moving Floor Bins

Custom fabricated from modular designs to the icemaking/storage capacities you need. MIP ”modular insulated panel” bins are fabricated at SEMCO and shipped knocked down for assembly at the job site. These bins consist of a heavy duty galvanized steel structural framework covered by white 4” thick insulated panels on the outside and white Galvalume corrugated sheets on the inside walls. The floor sections are pre-welded and shipped in sections.

Benefits

  • Offer a large variety of options for custom configuration to your exact needs.
  • Portable or permanent installation.
  • Ice producing / storage capacity: 5 to 100 tons fully customizable to your contract specifications.

Self-Contained Portable Ice Banks

Turn-key ice production and distribution systems. A total ice plant that can be moved! Ice slides forward on the high density polyethylene floors. Heavy-duty galvanized chains move the entire bank of Ice toward the discharge end. Ice is discharged on a “First-In First Out” basis so you always use fresh ice.

Because our Ice Banks are portable, you can install them without the hassles of building a permanent ice plant. THe Semco Ice Bank was specifically engineered for industrial and agricultural ice users who demand trouble-free Ice production at an economical cost. Features included:

  • Unitized steel frame maintains integrity for easy moving.
  • Produces ice at energy cost of $4.00 to $7.00 per ton.
  • 4-inches of 2lb. density foamed-in-place insulation.
  • Baked-on enamel galvanized panels on outer skin.
  • Heavy-duty galvanized pull chains, ice breaker bars, and screw conveyor for ice discharge.
  • Galvanized leveling screw distributes ice uniformly in bank.
  • Automatic Ice-maker shut off when bank is full.
  • Galvanized steel stairway & guard rails on upper deck.
  • Access door and observation windows provide.
  • Specialized ice distribution systems. Above system utilities ice batching scale & pneumatic blower (blows ice up to 600 feet away).

Model SC 1/25

  • Built any size to fit your needs!
  • Ice banks available from 10 tons to 90 tons storage.
  • Engineered to out perform all others!

SC Series / Self-Contained Moving Floor Bins

SC 8910 “Ice Bank”

  • 21 ton/day icemaker
  • 40 tons storage
  • Nonte Pneumatic Ice conveying system located on top of “Ice Bank” for a compact, secure area for servicing ice needs

SC 8910 “Ice Bank”

  • 15 ton/day icemaker
  • 40 tons storage

SC 8915 “Ice Bank”

  • two 15 ton/day icemaker
  • 60 tons storage

SC 8908 “Ice Bank”

  • Loaded on lowboy trailer, ready for delivery

SC Series Bins are self-contained, portable bins. These fully assembled, insulated ice storage bins feature heavy structural frames that are shipped to the job site on a lowboy trailer and lifted onto concrete support piers or other structural framework by crane. The bins have white Galvilume interior walls and exterior walls with 4” thick Urethane foamed in place insulation all around. The side walls and roof may be reinforced to support icemakers and other roof mounted equipment at additional cost. All structurals and ice contact surfaces are galvanized steel.

NI Series Non-Insulated “Ice Banks”

  • 20 tons storage
  • Non-insulated for use in refrigeration rooms

NI Series Non-Insulated “Ice Banks”
Modular moving floor ice storage bins that are shipped disassembled and put together at the job site. The wall panels and floor modules can be carried into an existing cold storage vault through walk-in doorways and assembled inside. These bins are available in galvanized or stainless steel with up to 120 tons storage capacity

NI 805 “Ice Bank”

  • 25 tons storage
  • Non-insulated for use in refrigeration room